Portable calibration systems

Pressure calibration systems

Pressure test pump used to generate pressure and vacuum for checking, adjusting and calibrating mechanical and electronic pressure measuring instruments by comparative measurements. These pressure tests may be carried out in laboratories, workshop or on site at the measuring point.


If the instrument to be tested and a sufficiently accurate reference measuring instrument are connected up to the test pump, the same pressure is applied to the two measuring instruments when the pressure test pump is operated. By comparing the two measure values at random pressure values, the accuracy can be verified or the instrument under test can be adjusted.


Despite its compact dimensions, the pressure test pump is easy to operate and allows for exact generation of the required test pressures; a change-over switch enables the generation of vacuum as well. The pump is fitted with a fine adjustment valve for generation of high pressure and a precise adjustment of pressures.


The reference instrument is screwd directly on the top of the pump and the unit under test is connected by means of the connection tube incorporating an adapter 1/4″ BSP female thread (freely rotating), contained in the scope of delivery.


Standard scope of delivery: Pressure & vacuum test pump with reference port (freely rotating) on the top of the pump and with rest item port (freely rotating) at the pressure hose connected to the pump, test hose, manual.
Many other accessories available on request.


Various models are available to cover a range from vacuum up to 700 bar